Keeping dampness in your home to a minimum can help you keep your home as warm and comfortable as possible. There are several things you can do to help reduce dampness in your home. These include insulating your loft, installing air bricks and draft-proofing your home.
Mould can grow on any surface
Keeping your home dry is the best way to prevent mould problems. But when there is a moisture problem, mould can grow on any surface. So, it’s important to check your home regularly to prevent mould from causing health problems.
Some of the most common types of mould include Aspergillus, Penicillium, and Trichoderma. They can be found on a variety of surfaces, including paint, paper products, wood products, and furniture.
The best way to keep your home dry is to install an exhaust fan in your kitchen and bathroom. Open doors and windows can also help.
When you have a mould problem, you should clean up the area as soon as possible. This is especially important if you have children or elderly residents in your home. E20 Locksmiths is a well-known, and an established locksmith company operating in East London
Having a home that is damp is a health hazard. It can lead to health problems like asthma, coughing and wheezing.
Excess moisture can lead to fungus growth on walls, upholstery, furniture and flooring. In addition, it can contribute to the corrosion of the home’s structure. This is why it is important to fix water leaks in the home.
The best way to do this is to make sure the surface drainage of your home is up to scratch. In addition, you should have the windows and doors properly sealed. If the window or door is not properly sealed, water could enter the house from outside.
Often, houses which are poorly ventilated will have dampness problems. Condensation and dampness will lead to problems like rotten timbers and mould. If you have problems with dampness, there are a number of ways you can fix them.
One way to do this is to install air bricks. Air bricks are specially designed to help ventilate the underfloor void. Traditionally they are made from clay, but now there are plastic air bricks which are less likely to break.
Air bricks can be installed at a number of different levels. The National House Building Council recommends that air bricks be installed 75mm above ground level. This will give you the best chance of keeping moisture out of the cavity.
Having double glazing installed in your home is a great way to improve the efficiency of your property. It also reduces the heat loss in your home during the winter. However, it can also lead to condensation problems.
Condensation is the accumulation of water vapour that forms on surfaces that are cooler than the surrounding air. It is also a common occurrence when warm air comes into contact with a cooler surface.
Condensation is more noticeable in very cold temperatures. It also is more common in bathrooms and kitchens where the humidity is high.
The most obvious cause is a failed seal. When the seal fails, moist air will enter the double-glazed unit and cause condensation. This can be prevented by opening your windows and doors to promote good ventilation.
Adding insulation to your loft is an inexpensive way to improve your energy efficiency and increase the comfort level of your home. It also can improve your home’s Energy Performance Certificate rating.
Although loft insulation isn’t the cause of damp, it does contribute to the problem. When warm air rises into your home, it condenses on cold surfaces. This is a common problem, especially if you have upgraded your insulation.
Another common cause of condensation is poor ventilation. When you cook, bathe or wash up without opening your windows, you are exposing your home to a lot of moisture.
The best way to prevent excess moisture in your home is to make sure your property is well-ventilated. If you have an extractor fan, make sure it is working properly. If it isn’t, consider installing a ventilation fan.
Using draught-proofing methods to reduce dampness in your home can be very easy. It can also help you save energy and reduce your heating bills.
Draughts occur when openings are left uncovered or there are gaps in the building construction. They can be found anywhere in your home, from the windows and doors to the pipes and flues.
A common place to draught-proof is around the skirting boards of a house. Using silicone-based fillers to fill small gaps can help reduce damp.
You can also buy special draught excluders for gaps around doors and floorboards. These can be fixed to the frame using small screws.